Partron PBH-400 Manual Del Usuario

English
PBH-400
CE Compliance Information
Partron Bluetooth Headset hereby declares that this PBH-400 is in compliance with the essential requirements of the
RE Directive 2014/53/EU of 16. April 2014
FCC Compliance Information
FCC ID : 2AD5K-PBH400
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: This device may not cause
harmful interference, and this device must accept any interference received, including interference that may cause undesired
operation. FCC Part 15.21 Any Changes or modifications (including the antennas) to this device that are not expressly approved
by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be colocated or operated in conjunction with any other antenna or transmitter.
Information to the user:
NOTE : This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this equipment causes
harmful interference to radio or television reception, can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION TO USER : Changes or modifications not expressly approved by the party reasonable for compliance could void
the user's authority to operate the equipment.
Contents
PBH-400 User Manual
/ Package Contents /
Foam Earbud Tips
Earbud Tips
(Small / Large)
Quick Guide
/ Description of Parts /
Micro USB
/ Product Specifications and features /
Standby Time
Operating Time (Music)
Operating Time(Call)
Charging Time
Battery
Working Distance
Supported profiles
Decoder
Bluetooth Version
Power Consumption
Frequency Band
Frequency Output Power
※ Above mentioned operating times based on connected devices or surrounding
environment.
/ How to use /
1. Power On / Off
Power On
- Press the call button for 1 second
- The red and blue LED light flashes for 0.5 seconds and a voice guide announces
that the power is turned on.
Power Off
- Press the call button for 3 seconds
- The red and blue LED light flashes for 0.5 seconds and a voice guide announces
that the power is turned off.
2. Battery Charging
LED indicator
- When the charger is connected, the Red LED is on.
- When charging is completed, the Blue LED is on.
※ When the charger is connected, the headset will be disconnected from the device.
※ The power turns off when the USB charger gets disconnected.
Recommendations
- Using an USB Hub may take extra charging time due to the low current.
For fast charging, please use a 5V 500mA ~ 5V 1A rated charger.
※ It takes approximately 2 hours to charge the device if the battery is totally empty.
3. Battery Status Alarm & Alert
- Press Call and Volume + button at the same time for a second for audio
guidance about the current battery level.
"Battery Full" / "Battery Half" / "Battery not enough"
4. Low Battery Alarm & Alert
- The red LED light flashes 3 times with the vocal guidance "Battery not enough" if the
battery will not last longer than one hour.
5. Critical Battery
- The notice continues every 2 minutes if the battery will not last longer than 10 minutes and
power is turned off with the voice guidance "Battery Empty" at the critical battery state.
6. Pairing
Before using the headset for the first time, you must pair it with a Bluetooth-enabled device.
* Pairing: Connecting Bluetooth-enabled device and headset.
- Press the call button for 1 second to turn on the device
- Once the power is on, the headset will automatically enter pairing mode.
(The red/blue LED light flashes)
- The headset will automatically enter the waiting mode if it is not connected within 3 minutes.
(The power is automatically turned off after 50 minutes in waiting mode)
- On the device you want to have paired, find the Bluetooth menu and search & select
"PBH-400" from the list of nearby Headsets.
- If connected without any problem, the headset will be paired accompanied by the audio
guide "Connected"
- Once the pairing is complete, the devices will be automatically paired afterwards.
※ Manual Pairing
- Press and hold the "call" button for 2 seconds to turn the device on.
It will automatically enter pairing mode with the voice guide "start pairing".
Scan for the PBH-400 and tap on it to connect.
- If PIN code is required, please enter "0000".
Clearing Paired Device
- Hold call button and Volume - button for 1 second after having turned off the Bluetooth of your
mobile devices. Previously established connections will be deleted with the voice guide
"Clear paired list", and the device will enter pairing mode.
7. Calling
Voice Dial
- Briefly press the Call button to activate Voice Dial.
※ To use Voice Dialing, your mobile phone must support this function.
8. Call Answer / Call End / Call Reject
Call Answer / Call End
- Briefly press the Call button to answer the incoming call.
- Briefly press the Call button to end the call.
Call Reject
- Press and hold the Call button to reject the incoming call.
9. Call Transfer
- During the call, press the Call button for 1 second. The audio will be transferred
from headset to mobile phone.
- Press Call button for 1 second again. The audio will be transferred from mobile phone
to headset.
10. Setting Waiting Mode while Calling
Setting Waiting mode
- During the call, briefly press Call button twice to put the call on hold.
Press Call button twice again to return to the call.
※ To put the call on hold, your mobile phone must support this function.
Incoming second call while calling
- Briefly press Call button to end the original call and answer the second call.
- Briefly press Call button twice to answer the second call without hanging up the
original call (Original call will be put on hold)
Ending a Call
- Briefly press the Call button.
11. Volume Control
Volume Up
- While calling or listening to music, briefly press the Volume + button.
Volume Down
- While calling or listening to music, briefly press the Volume - button.
Mute
- During the call, press Volume + and - buttons at the same time for mute.
- Press Volume + and - buttons at the same time again to cancel the mute.
12. Music Play
Music Play / Music Pause
- To play a song or pause playback, press the Play / Pause button.
Music Stop
- Press the Play / Pause button for 1 second.
Package Contents
Description of Parts
Product Specifications and Features
How to use
Power on/off
Charging
Pairing
Calling
Transferring a Call
Volume Control
Music Play
Change language settings
Multi-Connection
Using Partron Reader Application
Button Functions and Status Information
Precautions
Product Warranty and Service
Limited Warranty
Product Warranty Certificate
※ The components of the package are subject to
change without notice to improve the product
performance or quality.
PBH-400
Charging Cable
430 hours
8 hours
8 hours
2 hours
Lithium Polymer Battery 3.7V (130mAh)
10m
HFP / HSP / A2DP / AVRCP
SBC, APT-X
Version 4.1
0.5W
2.4GHz ISM Band (2.4000GHz ~ 2.4835GHz)
Max. 4dBm (2.5mW)
※ User can hear a long beep signal when the maximum and
minimum volume are reached.
LED
Volume Up
Play / Pause / Call
Volume Down
Mic
4
5
6
7
7
7
9
10
11
12
12
13
14
15
16
19
20
20
21