Level Gauge; Filling With Engine Oil And Checking The Oil Level; Filling With Petrol; Operation - Deltafox DG-PLM 4219 SP Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 147

Level gauge

The level gauge (
the side of the grass catcher (
aerodynamic air guidance provided by the
flap also optimises the filling.
GO
Flap open: grass catcher empty
STOP Flap closed: grass catcher full
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and dipstick
(19) and pour oil into the tank. The oil
tank holds 0.5 l oil. Use brand oil (e.g.
SAE 30).
2. To check the oil level, wipe the dipstick
(19) on a clean cloth and replace it in
the tank until it stops.
3. After pulling it out, read off the oil
level on the dipstick. The oil level
should be in the marked area be-
tween the minimum and maxi-
mum marks.
4. Wipe off any spilt oil and close
the oil filler cap (19).
Check the oil level every time be-
fore mowing and add oil before the
lower marking point is reached.

Filling with Petrol

Warning! Petrol is flammable and haz-
ardous to health:
- Keep petrol in containers intended for
this purpose;
24) is located on
20). The
- Only refuel outdoors and never with
the engine running or when the ma-
chine is hot;
-
Open the filler cap carefully to allow
excess pressure to escape;
-
Do not smoke whilst refuelling;
-
Avoid skin contact and inhalation of
the fumes;
-
Remove spilt petrol;
-
Keep petrol away from sparks, open
flames and other ignition sources;
-
Dispose of leftover petrol in an envi-
ronmentally friendly way (see "Dis-
posal / Environmental Protection").
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (8) and
pour in the petrol to the filler
plugs (32). Do not fill the tank
entirely, to allow the petrol room
to expand.
2. Wipe away petrol residues
around the filler cap and close
the filler cap.

Operation

A certain level of noise exposure
caused by this device is unavoid-
able. Rearrange noise-intensive
works to times approved and speci-
fied for this purpose. Comply with
the rest periods and reduce the work
period down to the minimum. For
your personal protection and the
protection of people near by, suitable
hearing protection must be worn.
GB
87

Publicidad

Tabla de contenido
loading

Tabla de contenido