Publicidad
Idiomas disponibles
Idiomas disponibles
Finished Wall
3-1/2" (8.9 cm) to
3-3/4" (9.5 cm)
Plaster Guard
1-1/4" (3.2 cm) to
1-15/16" (4.9 cm)
1. Install the Valve
CAUTION: Risk of product damage. Do not apply direct heat to
the transfer valve body. Excessive heat will damage the plastic
valve components and plaster guard.
Provide a 3-1/2" (8.9 cm) to 3-3/4" (9.5 cm) diameter hole in the
rough wall for the plaster guard.
Route the 3/4" mixed water supply line to the transfer valve
location.
Apply thread sealant to the inlet port threads and connect the
water supply to the transfer valve inlet.
116640-2-BC
Mixed Water Supply
3/4" Copper Tubing
or Piping
4
Kohler Co.
Publicidad
