For Your Safety; International Safety Symbols; Safety Precautions - Würth 0715 53 390 Manual De Instrucciones

GB
Please read and comply with these instructions prior to the initial operation of your
appliance.
Retain this instruction manual for future reference or for subsequent possessors.
■ 3-1/2 digit (2.000 count) LCD display.
■ Built-in non-contact AC voltage detector plus flashlight.
■ Double Molded housing.
■ CAT III 1.000 V.
■ Autoranging with auto power off.

International Safety Symbols

This symbol, adjacent to another symbol or
terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates
that, under normal use, hazardous voltages
may be present.
Double insulation.

Safety Precautions

■ Improper use of this meter can cause damage,
shock, injury or death.
Read and understand this users manual before
■
operating the meter.
■ Make sure any covers or battery doors are
properly closed and secured.
Always disconnect the test leads from any voltage
■
source before replacing the battery or fuses.
■ Do not exceed the maximum rated input limits.
2011-0583 0715 53 390_Multimetro Digital_User Manual_110726.indd 7

For Your Safety

Features
Safety
Input Limits
Function
V DC or V AC
Resistance, Diode &
Continuity Test
■ Use great care when making measurements if
the voltages are greater than 25 V AC rms or 35
V DC. These voltages are considered a shock
hazard.
■ Always discharge capacitors and remove power
from the device under test before performing
Diode, Resistance or Continuity tests.
■ Remove the battery from the meter if the meter is to
be stored for long periods.
Maximum Input
600 V DC/AC
600 V DC/AC
7
7/26/2011 5:04:15 PM