Important; General Warnings - kiwy Alia Manual De Instrucciones

Features
This product has been approved according to the European Standard
ECE R44/04 as a Child Restraint System for children weighing from 9 to
36 kg (Mass group: I,II and III).
IMPORTANT: The seat can be installed in vehicles equipped with ISOFIX
and Top-Tether anchoring systems and 3-point safety belts (see vehicle
application list).
Please consult your vehicle instruction manual for information about the
ISOFIX and Top Tether anchoring points and the installation with 3-point
belt. Also check which vehicle seats can accept child car seats in the
weight group I (9-18 kg), II (15-25 kg) and III (22-36 kg).
The vehicle safety belt must be approved according to ECE R16 Regula-
tion or any other equivalent Standard. If in doubt, please contact your
retailer or the manufacturer.
Depending by the child's weight, there are two different installation me-
thods ( See g.4) :
Children from 9 to 18 kg:
The child seat is placed forward facing, xed by Iso x and Top Tether, and
the child is secured by the Child seat harness system.
Children from 15 to 36 Kg:
The child seat is placed forward facing, xed by Iso x connectors and the
child is secured directly by the vehicle safety belt.

General Warnings

This product must be used only for the transportation of children in
·
auto vehicles.
It must not be used as a house or a table seat, nor as a toy.
·
For its correct installation, please follow the instructions given in this
·
booklet paying particular attention to the different installation me-
thod depending by the child's weight.
2
Never use installation methods different from the ones described in
·
this manual; a wrong installation may result very dangerous.
For safety reason, never use unapproved child car seats.
·
Also take care to have the installation instructions at hand in order to
·
avoid mistakes that may compromise safety.
Every time you use a child car seat, make sure that the child is properly
·
secured by the child seat harness, or the vehicle safety belt ( depen-
ding by the child's weight ).
What to do
Before installing this child car seat in the vehicle, please read carefully
this manual; an incorrect installation can be dangerous for the baby.
NOTE: After read these instructions, please keep this booklet in its pro-
per storage place, in the back of the child car seat ( detail T in Fig. 3 ).
After installing the child seat, check that no part of its harness belts or
·
seat belt of the vehicle remained stuck between the moving parts of
the child seat, the vehicle seat or in a door.
Check each time you use the child seat, that it is securely locked in pla-
·
ce with the seat belt tight, not twisted and properly secured, and the
Iso x connectors are ALWAYS correclty hooked.
· Before starting a trip with the baby on board of the child seat, check
that the harness belts are properly adjusted and not twisted, and the
buckle is properly fastened.
Exposure to the sun, even of short duration, can heat a lot the interior
·
of the car. To avoid overheating of the child seat, with the risk of burns
to the child, we recommend covering the seat with a fabric sheet, a
towel or something similar.
Regularly check the child seat for signs of wear or malfunctions of any
·
kind, with particular attention to the harness belts, its buckle and the
fabric covers.
In case of malfunction or evident wear and tear, stop using the seat
·
and contact your dealer or the after-sales service of the manufacturer
( +39 0376557861) , where capably staff can provide information and
assistance.
3