Publicidad
Step 10
å
First, fill the holes in the LOWER SHORT BRACES (I)
1/4 to 1/2 full with GLUE (54M). Then, insert the WOOD
DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
Now, fill the holes in the LOWER LONG BRACE (J) 1/4 to
1/2 full with GLUE. Then, insert the WOOD DOWELS in the
LOWER SHORT BRACES into these holes. Wipe away the
excess GLUE.
å
Fasten the LOWER SHORT BRACES (I) to the
LOWER LONG BRACE (J). Use two SILVER 2"
FLAT HEAD SCREWS (57S).
å
NOTE: Be sure the WOOD DOWELS in the LOWER
SHORT BRACES insert into the LOWER LONG BRACE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
I
57S
54M
15F
J
Fill the holes 1/4 to 1/2 full with GLUE.
57S
SILVER 2" FLAT HEAD SCREW
(2 used in this step)
I
15F
Page 15
Publicidad
