Klarfit 10035108 Manual Del Usuario página 27

Functions
TIME
SPEED
DISTANCE
ODOMETER
PULSE
CALORIE
Notes
• If no signal is received or no key is pressed within 4-5 minutes, the display
is automatically switched off.
• When a signal is received or a key is pressed, the display automatically
turns on again.
• If the indication on the display is incorrect or weak, replace the batteries
to obtain a good result. All batteries must always be replaced at the same
time.
Press the MODE button until the pointer
points to TIME. The workout time is
displayed as soon as you start exercising.
Press the MODE button until the pointer
is set to SPEED. The current speed is
displayed as soon as you start exercising.
Press the MODE button until the pointer
is set to DISTANCE. The distance covered
is displayed when you start exercising.
Press the MODE button until the pointer
points to ODOMETER. The total distance
covered by all courses is displayed.
Press the MODE button until the pointer
points to PULSE and place your hands on
the pulse sensors on the handlebars. After
3 seconds the current pulse is displayed.
Press the MODE button until the pointer
points to CALORIE. The calories burned
are displayed as soon as you start
exercising.
EN
27