Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HPS50
Contents
1.
Introduction
2.
Labels
3.
Warranty
4.
Description of the hydraulic crimping tool
5.
6.
7.
8.
9.
10.
1. Introduction
Before putting into operation the hydraulic
crimping tool please read the instruction
manual carefully.
Use this tool exclusively in the field of appli-
cation it is designed for.
This tool may only be operated by a specially
trained person. The instruction manual have
to be carried along during the entire life
span of the tool.
The operator has to
• ensure that the operating instructions are
available for the user
• make sure that the user has read and
understood the operating instructions.
2. Labels
On the hydraulic crimping tool you find a
label with the type designation, the name of
the manufacturer, the serial number and the
specifications.
3. Warranty
We guarantee perfect operation of the
hydraulic crimping tool.
Subject to proper usw we grant a warranty
period of 12 months from the date of deli-
very.
The law prescriptions in the country of tool
use apply, of different.
4. Description of the hydr. crimping tool
When there is no pressure, the tool head can
be rotated 180° to facilitate operation in
various situations. Fast piston movement
allows connector locking between the two
parts of the die with just a few pump
actions.
Before proceeding, make sure that the dies
groove is aligned with the area to be crim-
ped; if not, operate the pressure release and
position again.
Warning: Do not force the head to
rotate when the tool is under pres-
sure.
Page
17
17
17
17
18
18
18
19
19
19
19
20
20
20
17
Publicidad
Capítulos
Tabla de contenido
