HPS50
5.3. Service and maintenance
instructions
The routine servicing is required for preser-
ving the tool performances, and assuring its
lasting life.
The hydraulic crimping tool is maintenance-
free, only the bolt fastenings have to be
slightly oiled.
Warning: Only our qualified and
trained staff are allowed to carry out
the maintenance work on the
hydraulic crimping tool.
Please Note: To ensure the maximum wor-
king life of the tool, we suggest having it
specially serviced every 24 months by our spe-
cialist personnel.
Never tamper with the hydraulic crimping
tool.
5.4. Storage and transport of the
hydraulic crimping tool
In order to protect the compression tool from
damage, it has to be placed into the trans-
portation case (optional) after use and care-
ful cleaning. The case has to be locked safely.
6. Troubleshooting
a) The dies (4) stop during the crimping
process
• Examine whether the hydraulic
compression head is bolted correctly.
• Pressure give up again and again try.
• Return the tool to the manufacturer
b) The compression tool loses oil.
• Return the tool to the manufacturer.
Do not open the tool or remove the
seals.
7. Putting out of service / disposal
The various components of the tool have to
be disposed of separately. First drain the oil
and take it to a special disposal point.
Warning: Hydraulic oils represent a
danger for the ground water.
Uncontrolled draining or improper
disposal are punishable (Environment
Liability Law).
For the remaining parts of the tool please
observe the valid environment regulaions.
To avoid damage to the environment we
recommend that authorized professional
companies dispose of the tool. The manu-
facturer can not take back the tool free of
change.
If you need any assistance please con-
tact our technical service or your resai-
ler:
Phone:
+34
93 808 79 80
19