Technical Features - Trevi RR 504 BT Manual De Uso

RR 504 BT
A) Bluetooth ENCODING to USB
1. Connect the Bluetooth according to the above Bluetooth operation and select the track you wish to record.
2. Press the " " button (3) and then start playback of the desired track - the display will show "REC" and then change to flashing
"REC" and "USB" icons meaning recording is in progress.
3. After recording has finished, press the " STOP " button (9) to stop recording and the "REC" and "USB" icons will disappear.
B) TAPE ENCODING (CASSETTE PLAYER)
1. Select " TAPE " mode and play the tape to the track that you wish to record. Then press the tape pause key of the cassette
desk (12) to get ready.
2. Then press the" REC " button (3).The display will show "REC", then change to flashing "REC" and "USB" icons "meaning
the encoding process starts.
3. You may now release the tape pause key of the cassette desk (12) to playback the track you got ready for recording. Now the
USB will start recording from the tape.
4. After recording has finished, press the " STOP " button (9) to stop recording and the "USB" and "REC" icons will disappear.
TRACK SEPARATION
During encoding to USB it is possible to separate the music tracks from Bluetooth Tape etc. While encoding to USB from the above
sources, press the (track separation) button (4) once after each track has finished playing, the system will then generate a new track
and continue recording the next track. The word " TS " will briefly appear on the LCD display - this means the unit is successfully
creating a new track and will continue recording. When the last track has played and been recorded, press the Stop button (9).
Note: If the Track Separation option is not used, the music recorded on the USB Flash Drive will appear as one long track, and it
will not be possible to skip up or down to select tracks during playback.
NOTES:
- The recording speed is 1:1 and according to the actual plying time.
- The system will create a "audio " folder "and then store the encoding track in it.
- The recording format is default at – MP3 bit rate : 128 kbps, sampling rate : 44.1kHz
- No song title will be recorded during encoding mode
- To interrupt the recording, press the" STOP " button (9) during recording.
PRE-SET EQ FUNCTION
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing
the " Preset EQ " button (11) repeatedly at following sequence: FLAT
HEADPHONE
1. Insert the headphones into the headphone jack (14). The speakers will be deactivated.
2. Start the desired playback and adjust the volume.

TECHNICAL FEATURES

Power supply: ..........................................................................................230V ~ 50 / 60Hz
..................................................................................................8x "C" batteries (UM2) not included
Power consumption: ................................................................................12W
FM reception range: .................................................................................87.5 - 108.0 MHz
Transmitting power max Bt : ......................................................................2.5 mW
Bluetooth transmission band: ....................................................................2,4GHz
Dimensions: .............................................................................................430x 290x 115 mm
CLASSIC ROCK POP
ENGLISH
JAZZ .
13