Flex LE 12-3 100 WET Instrucciones De Funcionamiento Originales página 21

LE 12-3 100 WET/L 12-3 100 WET
 If required, remove old grinding tool.
 Attach new grinding tool to the tool holder.
 If assembling the power tool for the first time,
perform steps 3. and 4. only.
Function test:
 Insert the mains plug into the socket.
 Switch on the grinder (without locking the
button) and leave it running for approx.
30 seconds. Check for imbalances and
vibrations.
 Switch off the grinder.
Switching on and off
Brief operation without engaged
switch rocker:
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release the
switch rocker.
Continuous operation with engaged
switch rocker:
`^rqflk>
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇJçå=
ã~ÅÜáåÉ=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK
 Push the switch rocker forwards (1.) and
engage by pressing the front end (2.).
 To switch off the power tool, release the
switch rocker by pressing the rear end.
Speed preselection
(LE 12-3 100 WET only)
To set the operating speed, move the dial to the
required value.
21