Kohler K-T6808 Guía De Instalación Y Cuidado página 4

Shower Elbow
Sleeve
Collar
Escutcheon
O-Ring
Shower Arm
Setscrew
Showerhead
2. Install the Showerhead
Remove the temporary nipple from the shower elbow.
Slide the collar, sleeve, and escutcheon onto the shower arm.
Apply thread sealant tape and install the shower arm to the
shower elbow.
Carefully tighten with a clean strap wrench.
Press the escutcheon and the sleeve against the finished wall.
Slide the collar tight against the sleeve and the escutcheon, and
secure with the setscrew.
Turn the water supply on.
Run hot and cold water through the shower arm to flush out dirt
and debris.
Apply thread sealant tape to the shower arm and thread the
showerhead to the shower arm.
1088008-2-C 4 Kohler Co.