Care And Maintenance - Dyna-Glo DGA480BSN Manual Del Usuario

CARE AND MAINTENANCE

BURNER ASSEMBLY
REMOVING THE BURNER ASSEMBLY
1. Make sure all control knobs are in the OFF
position, gas supply valve is closed, and the
gas hose is disconnected from the gas supply.
2. Open lid and remove warming rack, cooking
grates, and heat tents.
3. Remove cotter pins at back of burners to detach burners from brackets.
Cotter Pin
Burner
4. Slide burners out of firebox as shown.
5. Detach ignition wire from ignitor as shown.
17
Warming Rack
Cooking Grates
Heat Tents
Burner
Bracket