Manta MIC002 Manual De Usuario página 4

User's Manual E N
Wired & Wireless Microphone Instruction
OPERATION
l. Insert a battery into the wireless receiver with the correct polarity, set
the switch of receiver to -ON' position, now, the indicative light is
indicating good condition.
2. Plug the receiver into the input socket for microphone of amplifier or
VCD.
3. Set the switch of microphone, now, the indicative light is indicating good
condition. This indicative light is indicating good condition. This show it is
ready for operation.
4. When you need temporarily stop during singing and you don't want the
microphone to pick up any other sound, you may set the switch to the
middle (MIC) position. Now, the lamp is still on but your microphone
doesn't transmit any sound.
5. Use it as wired microphone: Take out the battery from the microphone,
connect the wire with the microphone and set the switch to MIC position.
Attentions :
I. If acoustic quality and volume are abnormal or receiving is shorted, the
batteries in wireless microphone and receiver should be replaced. If there
is still not in normal operation, you can carefully trim the frequency of
receiver with a screw driver to become normal operation.
2. If you don't use your microphone for a long period, the battery should
be taken out to avoid its deterioration and the damage of components.
3. If two wireless microphones are used at the same time, you must use
them with one red and one green lamp. No using them with the lamp of
the same color.
4