BOERBOEL GardDog Instrucciones De Instalación página 4

(Step 1 Continued)
g.) Using two 10mm round head Phillips machine
screws, secure rear handle to the two threaded
corner prongs of the front handle (Fig. 6).
h.) Snap on rear handle cover (Fig. 7)
Mounting The Catch To The Post
2
a.) Slide the catch onto the catch bracket (Fig. 8).
b.) Align the catch at the correct height along post to
engage with the front handle striker (Fig. 9).
c.) While holding the catch bracket in place, mark the
center of the two slotted holes on the inside of the
post (Fig. 10).
d.) Slide the catch off of the bracket and mark the
center of the slotted hole on the front of the post
(Fig. 11).
4
10mm
Screws
Rear Rear
Handle Handle
Catch Catch
Bracket Bracket
Catch Catch
Inside Inside
of Post of Post
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Catch Catch
Fig. 10
Fig. 11