Kingston DataTraveler Locker+ G2 Manual De Instrucciones página 12

Browse DTL+ G2
• Allows you to browse the contents of the secure data partition while you are logged in
Format DTL+ G2*
• Allows you to format the secure data partition
(Warning: All data will be erased.) (
Online Support (Requires Internet access)
• Opens your Internet browser and navigates to
http://www.kingston.com/support/
can access additional support information
About DTL+ G2
• Provides specific details about the DTL+ G2,
including Application and Firmware version
information (
Figure 5.8
Shutdown DTL+ G2
• Properly shuts down the DTL+ G2, allowing
you to safely remove it from your system
(Recommendation: After shutting down your DTL+ G2, it's always best practice to
shutdown or reboot the host workstation your drive was connected to, especially if
you're in a public place or using a workstation that is shared by multiple people.)
*Note: Your current DTL+ G2 password is required in Windows Vista and Windows 7
Document No. 48002017-001.A03
Figure 5.7
where you
)
-Windows Section Complete-
®
DataTraveler
)
Figure 5.7 – Format Warning
Figure 5.8 – About DTL+ G2
Locker+ G2 Page 11 of 22