Siemens SENTRON PAC4200 Instructivo página 6

Standard for pulse emitter Signal characteristics in accordance with
IEC 62053-31
Adjustable pulse duration 30 - 500 ms
Min. settable time frame 10 ms
Max. switching frequency 17 Hz
Communication
Ethernet port
Design RJ45 (8P8C)
Suitable cable types 100Base-TX (CAT5)
Grounding of cable required
Protocols supported Modbus TCP
Transmission rates 10 / 100 Mbit/s, Autonegotiation and Auto-
MDX (Medium Dependent Interface)
Serial gateway
Function Serial gateway for converting Modbus TCP to
Modbus RTU or SEAbus
Requirements for use SENTRON PAC RS485 expansion module
Number of devices that can be max. 31/247 without/with repeaters
operated
Port number 17002 for operation at slot "MOD1"
17003 for operation at slot "MOD2"
Display
Display
Size W x H 72 mm x 54 mm
Update time 0,33 ... 3 sec, adjustable
Connection elements
Measuring inputs and supply voltage inputs
Screw terminals
Tools PZ2 cal. screwdriver ISO 6789
Crimping tool in accordance with 60947-1
For further data see Fig. 20.
Ring lug terminals
Connection bolt M3 ... M4, #5 ...#8
The country-specific standards for ring cable lugs must be complied with, e.g.
UL-listed under ZMVV /7, CSA, DIN 46237, IEC 60352-2.
Please observe the instructions of the cable lug manufacturer and
IEC 60352-2 regarding suitable crimp connections. The ring lugs must
be mounted parallel to each other.
Terminal screws
max. vertical screwing force 30 N, 6.75 lbf
Tools PZ2 cal. screwdriver ISO 6789
Crimping or pressing tool according to manu-
facturer's information for ring lugs
For further data see Fig. 21.
Digital outputs, digital inputs
Screw terminal
Tools PZ1 cal. screwdriver ISO 6789
Crimping tool in accordance with EN 60947-1
For further data see Fig. 22.
Dimensions and weights
Type of fixing Panel mounting to IEC 61554
Size W x H x D 96 mm x 96 mm x 82 mm
Cutout (W x H) 92
Overall depth
Without expansion module 77 mm
With expansion module 99 mm
Permissible switching panel thick- max. 4 mm
ness
Installation location Vertical
Weight
Device without packaging approx. 450 g
Device including packaging approx. 550 g
Degree of protection and safety class
Safety class II
Degree of protection according to
IEC 60529
Device front IP65, type 5 enclosure acc. to UL 50
Device rear
Device with screw terminals IP20
Device with ring lug terminals IP10
If higher degree of protection requirements are placed on the application engi-
neering, the customer must take suitable measures.
Ambient conditions
Temperature range
Ambient temperature during oper- – 10 °C ... + 55 °C
ating phase
Ambient temperature during – 25 °C ... + 70 °C
Transport and storage
Relative humidity 95 % at 25 °C without condensation
(normal conditions)
Installation altitude above sea level max. 2000 m
6
+0.8 +0.8
mm x 92 mm
Degree of pollution 2
Environmental tests In accordance with IEC 60068
Further technical data, e.g. measuring accuracy, can be found in the
SENTRON PAC4200 Manual.
A5E02316203-01