Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
01
02
03
04
01 – Mixing Rod
02 – Coupling Assembly
03 – ON/OFF Switch
04 – Motor Base
05 – Reset
06 – PULSE Button
07 – Speed Variator
FEATURES
UNITS
Voltage
Frequency
Hz
Nominal Rating
W
Power Rating
HP
Height
mm
Width
mm
Depth
mm
Net Weight
kg
Gross Weight
kg
4. OPERATIONAL PROCEDURES
4.1 Activation
• Make sure that the Equipment is firm and stable on the
working station.
• Connect the Equipment to the electrical power supply.
• To activate the Equipment press the ON/OFF button N°03,
placed in the frontal display located at the motor base N°04.
4.2 Operation
05
08 – Cup Coupling
09 – Central cutting unit
with knife
10 – Cup
11 – Lid
12 – Overlid
BM2
V
127
50-60
1050
3
510
205
230
5.5
6.5
12
1
ON/OFF
11
10
2
Speed Variator
09
08
07
3
PULSE Button
06
•
NEVER turn the equipment ON without ingredients
inside the cup.
•
NEVER try to take the cup out or replace the cup when
the motor is running.
•
Remove all liquids from the Cup coupling Nº08 before
the Equipment is turned ON. Any presence of liquids
in this space can cause damage to the motor.
•
Make sure that the Cup's shaft is completely
assembled on the Coupling Assembly Nº 02 and that
the knife Nº 09 is firmly assembled on the shaft.
•
This blender works with high speeds. The processing
times are much faster than in other types of blenders,
therefore, this equipment cannot be used for a long
220-240
period of time without a pause otherwise overheating
50-60
of components and damage may occur.
1200
•
Adjust the speed using the Speed Variator, it allows
you to blend different ingredients of different
3
consistencies.
510
•
Liquid must always be placed in the cup when the
205
objective of the Processing is to crush ice.
230
4.3 Recipe
5.5
-800 g of carrot with 1200 ml of water.
6.5
-2 minutes on and 1 minute off.
5. CLEANING
Remove the plug from the socket before starting the
cleaning process.
Equipment must be thoroughly cleaned and sanitized:
- Before being used for the first time;
- After the operation of each day;
- When not in use for an extended period;
- Before you put it into operation after prolonged downtime.
Some parts of the equipment may be removed for cleaning:
-Cup
-Cover
Cleaning Instructions:
- To wash the inside of the glass, fill the glass to half
its capacity with water and add a small dose of neutral
detergent.
Press up to turn the
Equipment ON. Press
down to turn the
equipment OFF.
Allows the user to
adjust the motor speed
within the specified
operational range. Turn
the button clockwise to
the maximum point to
achieve the maximum
speed and efficiency.
Press the PULSE button
to activate a Small spin of
the knife.
Publicidad
Tabla de contenido
