Bose Acoustic Wave II Guía De Usario página 5

Charging the power pack
Figure 2
Connecting the
power supply
Power supply
output cord
Power
pack
Power pack indicators
Using The Power Pack
Initial charging time for a new power pack is approximately four
hours. After that, recharging may take up to three hours,
depending on the amount of remaining charge in the power
pack.
1. Plug the power supply output cord into the DC power input
connector on the power pack (Figure 2).
2. Plug the small end of the AC power cord into the power
supply.
3. Plug the AC power cord into a live AC (mains) outlet.
Observe the power pack indicators while charging.
4. When the power pack reaches full charge (all indicators off),
disconnect the power supply.
1
Charging progress:
1 flashing indicator – 1 to 25%
2 flashing indicators – 26 to 50%
3 flashing indicators – 51 to 75%
4 flashing indicators – 76 to 99%
All indicators off – 100%
Using The Power Pack
Power supply
2
4
3
AC Power
cord
5