Description Of Symbols - Silverline 282400 Manual De Instrucciones

Ocultar thumbs Ver también para 282400:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product . This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual .

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection.
Wear breathing protection .
Wear head protection .
Wear hand protection .
Read instruction manual .
Conforms to relevant legislation and safety standards
Caution!
DO NOT use on scaffoldings or ladders!
DO NOT use with compressed gas cylinders!
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
8
Original Instructions
Technical Abbreviations Key
psi
°
Ø
BSP
nm
dB(A)
m/s
2
Specification
Maximum operating pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Bar
Working pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Bar (75-115psi)
Air consumption: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5L/s (10 .69ft3/min)
Air inlet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ¼" BSP
Minimum hose diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .outer diameter 8mm
Nail capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 pieces
Nail gauge: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12 gauge
Nail head diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 .8-7 .2mm
Nail shank diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .87-3 .33mm
Nail length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-90mm
Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458 x 142 x 365mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 .2kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 .2dB(A)
PA
Sound power L
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 .2dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Vibration emission value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .2m/s
Uncertainty: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary,
limit the length of time exposed to vibration and use anti-vibration gloves . Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have a greater effect . Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool .
Sound and vibration levels in the specification are determined according to international standards.
The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that
may be useful to domestic users who use tools for long periods of time.
The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Pounds per square inch
Degrees
Diameter
British Standard Pipe (thread)
Nanometre
Decibel sound level (A weighted)
Metres per second squared (vibration
magnitude)
2
2

Publicidad

Tabla de contenido
loading

Tabla de contenido