Boiling Water; Using Your Kettle; Cleaning And Care - Bodum OTTONI Manual Del Usuario

BOILING WATER

USING YOUR
KETTLE
CLEANING AND
CARE
Open the lid.
Fill the jug kettle with required amount but do not fill the
jug above the MAX mark.
Completely unroll the cable.
Put the cordless model on its base.
Plug in the main plug. (Warning: appliance becomes hot
during use).
Switch on the kettle.
The indicator lamp will turn on.
When the water boils, the appliance will switch off
automatically.
Water can be poured out with the lid on.
The cordless model can easily be removed from its base.
The base remains near the socket. After use, the
kettle should be replaced on its base at once, and it is
immediately ready for use again.
Heating can be stopped at any time by operating the
on/off switch.
The appliance is only suitable for heating and
boiling water.
Do not use any other liquids. The heating element must
be covered with water ("0.5L" Or above on water level).
Otherwise there is danger of overheating.
Should the boil-dry protection operate, allow the kettle to
cool down. The appliance will be ready for use once cooled.
The MAX mark flag will show you how much water you
have put in the jug.
WARNING: Do not remove the Steam Cap. It prevents
water from entering into the Steam Tube and leaking from
the kettle while in use.
Before cleaning first unplug the appliance.
Allow it to cool down.
Wipe it inside and out with a soft cloth.
Descale your jug kettle weekly.
9
EN