Control Panel And Adjustments - Ice-O-Matic HISU050 Manual Del Usuario

User Manual for Models HISU050, HISU070 AND HISU090

Control Panel and Adjustments

Ice Bridge Thickness Adjustment Area
Ice Bridge Thickness Adjustment
Réglage de l'épaisseur du pont de glace
Ajuste del espesor del puente de hielo
Regolazione spessore ponte di ghiaccio
Anpassung der Eisbrückendicke
-
+
-
+
17-3386-01
Ice Thickness Diagram
Ice Too Thin
Ice Just Right
Bridge
Ice Too Thick
Adjustment Indicator Lights
Each push and release of the + or - button will change
the lights that glow or blink indicating a change in ice
size or harvest time. Example: pushing + one time
changes a blinking light to steady on type. If the lights
are on steady a single push of + will add one more
light to the right and it will blink. There are 10 settings.
All 5 lights on steady is the maximum setting and one
blinking light is the minimum.
All manuals and user guides at all-guides.com
ON / OFF / WASH
MARCHE / ARRÊT / LAVAGE
ENCENDIDO / APAGADO / LAVADO
ON / OFF / LAVAGGIO
EIN / AUS / WASCHEN
Master Switch. Move to ON (left side depressed) to make ice, OFF
(centered) to shut off and WASH (right side depressed) for use in
cleaning.
Harvest Time Adjustment Area
Harvest Time Adjustment
Réglage du temps de récolte
Ajuste del tiempo de cosecha
Regolazione orario di raccolta
Anpassung der Erntezeit
Indicator Light Area.
Freeze Mode
Mode de congélation
Modo de congelamiento
Freeze Mode light is ON when unit is in a Freeze cycle.
Modalità congelamento
Gefriermodus
Timer On
Timer On light is ON when trigger point temperature is reached in
Minuterie allumée
Cronómetro encendido
Freeze or Harvest.
Timer attivato
Timer eingeschaltet
Ice Bridge Thickness Adjustment
Refer to the Ice Thickness Diagram for proper ice
size.
Adjust by pushing the + sign or – sign on the ice
bridge adjustment section of the control panel.
Changing bridge thickness should be a one-time
adjustment as the machine will automatically maintain
that ice thickness.
Harvest Cycle Time Adjustment
After ice has formed in the inverted mold, it must be
released so it can be deposited in the storage bin
section. The harvest cycle is when that occurs, and
must be long enough for the ice to release. While the
harvest cycle length is self adjusting it can also be
manually adjusted if needed.
Proper harvest time is when the ice falls into the
bin and there is about 10 seconds extra harvest
time (pump and fan are off) before the freeze cycle
restarts.
If the harvest time is too short to release the ice,
the time may be increased by pushing the + sign on
the harvest time adjustment section of the control
panel. Operate the machine for another cycle to
confirm that the adjustment was correct. Note that too
much harvest time will slightly decrease making ice
capacity.
July 2013
Page 9