perma-tec STAR VARIO S60 Traducción Del Manual De Instrucciones Original página 18

Translation of the Original Operating Instructions
EN
= Attention: Danger
To prevent the lubrication system from posing any risks, the operator must
ensure that:
- only qualifi ed personnel work on and with the lubrication system;
- personnel keep the Operating Instructions to hand when carrying out all
relevant work and comply with them;
- the necessary accident prevention and safety regulations are adhered to
during installation or maintenance work;
- the lubrication system is used properly and in accordance with its
intended purpose and is not incorrectly adjusted or modifi ed.
Observe safety data sheets of oil/grease.
Avoid contact of oil/grease with eyes, skin and clothing; also avoid swal-
lowing of oil/grease.
Prevent oil/grease from getting into soil or sewer system.
Oil/grease on traffi c routes will increase the risk of slipping. Clean the fl oor
immediately using appropriate cleaning agents.
Batteries:
2x
Do not reuse! Do not reuse!
Do not expose to fi re! Do not expose to fi re! Do not expose to fi re!
You may download lubricant data sheets from our web site
or ask your local supplier.
We accept no liability for any damages and malfunctions which are
caused by inappropriate usage and inappropriate operations on or
with the lubricator.
At the time of delivery, the lubrication system corresponds to the state
of the art and, as a basic principle, is considered safe to operate.
- 31 -
Do not open! Do not open!
RECHARGE
Do not charge!
= Note, tip
- 32 -
Properties
I
Components/Initial assembly
II
Handling
III
Displays
1
Confi guration
2
Operating modes
3
Installation
IV
LC exchange
V
A Protection cover
B Drive (re-usable)
Battery (not re-usable)
C
Filled LC (not refi llable)
D
Discharge period in months
E
Storage conditions
F
Alkaline manganese
G
Airborne noise emission
H
LED
I
Display
J
K Push button
This manual helps ensure safe working on and with the automatic
lubrication system, which is designed for use in machinery and equipment
and which lubricates roller and sliding bearings, chains, sliding guideways,
open gears, etc. with oil/grease.
Upon delivery, make sure to check that the delivered goods correspond to
your order. No liability is accepted for subsequent claims of any defects.
If you have any questions or problems, please contact our customer
service team or your local supplier.
Ex-protection
VI
Waste disposal
VII
Trouble shooting
VIII
Error
1
Cause
2
Corrective action
3
Declaration of conformity
IX
Push down and hold
L
M Release button
In operation (blinking)
N
Empty LC
O
Installation-/Exchange date
P
Plug
Q
Oil fi lled
R
Oil retaining valve
S
Battery disposal
T
Oil containing waste
U