Turning the System On
Before turning on the system, make sure that the system connections have been
completed correctly.
For connecting the system, see "System Connections" on page 23.
1
Turn on equipment you are using for the videoconference.
2
Press
1
The indicator of the switch lights in green and the system turns on.
3
Make sure that the shutter of the camera is open.
If it is closed, slide the shutter switch on the top of the system to open the
shutter.
4
Press the VIDEO CONF button on the Remote Commander to display the
launcher menu.
(power) switch on the right side of the system.
IP:012.345.678.912
ISDN:012345678912
1
2
Bob
John
ISDN
1
3
4
5
OSAKA
NEW YORK
Turning the System On
(power) switch
Detailed Dial
Phone Book
6
Dial
7
GB