Rack Guidelines - Samsung FlexDry DVEG60A9900 Serie Manual Del Usuario

Before you start

Rack guidelines

Flexible rack
The flexible rack is designed to dry delicate items that are not suitable for or cannot be dried in the lower
dryer.
A
B
38 English
Untitled-5 38
To use the flexible rack
1. Locate the rack supports (x4) in each corner of the
upper dryer. Push down the lower area of the front 2
supports to unfold. The rear 2 supports are fixed.
2. Insert the flexible rack (A) inside the upper dryer.
Make sure all 4 corners of the rack sit on the rack
supports properly.
NOTE
You don't have to use the drying rack. Put bulky items
below the rack and put any additional items on the rack.
3. Insert a folded dryer sheet in dryer-sheet case (B),
and then put the case at the top center of the rack.
Make sure the dryer-sheet case faces against the
triangle mark on the upper dryer because only the
arrow area has the built-in magnet to secure the
filter.
NOTE
If using a large-sized dryer sheet, the dryer-sheet case
may not close normally. However, this does not affect
the drying performance.
Bulky items are easily wrinkled in the upper dryer. Do not
dry bulky items in the upper dryer. Please see the Upper
dryer section on page 43 for reference.
WARNING
Do not dry animals, plants, food items, or anything else
but clothing.
2021-05-25 5:20:41