Tacky Roller Cleaning; Cleaning Tacky Roller; Tools Required - Rimage Professional 2450 Guia Del Usuario

Tacky Roller Cleaning

14.1: Cleaning Tacky Roller 1

Regular tacky roller cleaning keeps the integrated Everest 400 printer
in optimal operating condition.

# Tools Required

• Sponge swabs with long handles (included in the Everest Cleaning Kit)
• 99% isopropyl alcohol
1. Make sure the system is powered off and that there are no
active or pending production jobs.
2. Remove the print ribbon carrier and print ribbon. For specific
instructions on how to do this, refer to the Change the Print
Ribbon procedure on the inside of the printer cover.
Center Latch
Print Ribbon Carrier
2004849_A
3. Clean tacky roller 1 on the print ribbon carrier:
Print Ribbon Carrier
4. Refer to page 15 for instructions on how to clean tacky roller 2.
For more information visit rimage.com/support
a. Remove the sponge swab and the swab handle from the Everest
cleaning kit.
b. Insert the sponge swab into the unnotched end of the swab handle,
if necessary.
c. Apply isopropyl alcohol to the sponge swab.
d. Use the sponge swab to clean any dust or waxy residue from tacky
roller 1.
Tacky Roller 1
14