Specific Safety Rules - BLACK&DECKER MATRIX BDCMTHPI Manual De Instrucciones

wARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
wARNING:
Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.

SPECIfIC SAfETy RULES

fOR hOME USE ONLy:
• Inflate bike tires, balls, rafts, swimming pool floats, air mattresses, and m ore in and around the
home. Recommended maximum continuous duty at 65 psi is 2 minutes on with 5 minutes off.
wARNING
:
Risk to breathing.
• The compressed air from your inflator is not safe for breathing. Never inhale air from your
inflator or from a breathing device connected to the inflator.
wARNING
:
Risk of bursting.
• Too much air pressure causes a hazardous risk of bursting. Check the manufacturer's
maximum pressure rating for objects being inflated.
• Do not leave inflator running unattended. It could burst tires or other items.
wARNING
:
Risk of unsafe operation.
• Do not modify or attempt to repair. Never drill into, weld, or make any modifications to the
inflator or its attachments.
• Operate only with the accessories included or air handling parts acceptable for not less than
170 psi. The use of any accessory not recommended for use with this tool could be hazardous.
• Never "horseplay." High pressure air is dangerous. Don't direct air-flow at yourself or others.
wARNING
:
Always leave the valve adaptor lever open when not in use.
wARNING
:
• Inflator can become hot during use. Allow inflator to cool 30 minutes before storing away.
California Proposition 65
wARNING
:
This product or its power cord contains lead, a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
SyMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
.............direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
............Read instruction manual before use
................Use proper eye protection
RISk Of fIRE:
A ...................amperes
W ..................watts
................alternating current
n o .................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
..................Use proper respiratory protection
..................Use proper hearing protection
2