Dometic PERFECTVIEW MC 402 Guía De Inicio Rápida página 9

MC402
3 Operating the moniceiver
NOTE
The moniceiver can be operated using the buttons on the device
display or using the remote control.
An acoustic signal acknowledges the function that is selected. The
acoustic signal can be deactivated using the SETTINGS menu. You
can find additional information on the settings for this device in the
installation and operating manual.
Switching the device on and off
➤ Press the ON/OFF/VOLUME knob or the POWER button on the remote
control to switch on the device.
✓ The device switches on with the settings which were activated the last time it was
used.
➤ Press and hold down the ON/OFF/VOLUME knob for two seconds or press
the POWER button on the remote control to switch off the device.
Selecting the audio/video source
➤ Press the MENU button on the device.
✓ The menu for the required source appears on the display.
You can also select the audio/video source via the remote control. To do this, press
the SRC button on the remote control until you have selected the required source.
You can also select the audio/video source via the display. To do this, touch the
required source on the display.
NOTE
A source cannot be selected if it is not ready to play. After inserting the
storage medium, wait a few seconds until the device has read the
available files automatically and shows it on the display.
EN
Operating the moniceiver
9