Dhcp Server; Internet Settings - Intenso Memory 2 Move Pro Manual De Instrucciones

 Security:
 Password: WPA‐PSK , WPA2‐PSK , Mixed WPA‐PSK/WPA2‐PSK: Minimum 8
 IP Address: The default IP address is set to 10.10.10.254 with subnet mask of
 Click the "Save" button to save changes. Click the "X" to exit and cancel.
12.4.3 DHCP SERVER
The DHCP or Dynamic Host Configuration Protocol is a network protocol that allows a
server to automatically assign an IP address to a computer connected into a network.
By default, the DHCP Server option is enabled. This option can be disabled if needed
and the IP address can be manually assigned.
Click the "Save" button after making any changes. Click on the "X" to exit and cancel.
Click the "DHCP List" button and it will provide a list of all the computers and devices
connected to your "Memory 2 Move Pro" Device. Please see the screenshot below.
12.4.4 INTERNET SETTINGS
You can choose between two available Internet Access options – By default Wireless Access is
selected (as you can see on the picture).
A. Wireless Access: Connecting the "M2M" device to another wireless network to have
internet access.
B. Wired Access: Directly connecting the "M2M" to the available port on the back of the
router to connect to another network.
Selecting Wireless Access
to 11Mbps (802.11b), 54MBPS (802.11G), and 150Mbps (802.11n).
The WPA‐PSK, WPA2‐PSK, Mixed WPA/WPA2‐PSK (default) are
available.
(Maximum 63) characters.
255.255.255.0. The IP address can be changed.
EN‐ 53