Care & Maintenance - Cosatto Nitty Gritty PORT Manual De Usuario

20
Preparation
Unfold Anti-rebound bar (1).
Unfold ISOFIX arms (2).
Unfold support leg until it locks in place (3).
Fitting
21
Position the base over the vehicle seat (1). Engage the ISOFIX arms (2) and ensure
that the ISOFIX arm security indicators are green (3).
22
Hold the ISOFIX leg adjustment button (1) and adjust ISOFIX leg (2).
ISOFIX leg MUST make full contact with the floor (3).
23
Fitting child car seat to child car seat base
Place car seat on base (1) and push down until securing rods are fully engaged (2).
Lift car seat to check locks are secure.
Note: Yellow strip on base should be hidden by the car seat (3).
24
Removing child car seat from child car seat base
25
Removing child car seat base from vehicle seat
Care & Maintenance
Store your child restraint system in a dry, safe place.
Storing a damp child car seat base will encourage mildew to form, so after exposure
to damp conditions, dry off with a soft cloth and allow to dry thoroughly before
storing.
Avoid leaving the child restraint system in sunlight for prolonged periods as this may
cause fabrics to fade.
Inspect the child restraint system regularly for signs of damage - stop using the
product if damage is found.
DO NOT take apart, or attempt to take apart the child restraint system when cleaning.
It is unnecessary and dangerous to do so.
Plastic and metal parts may be sponged clean with warm water and a mild detergent.
Refer to the wash care on soft goods for cleaning instruction.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.