Publicidad
Idiomas disponibles
Idiomas disponibles
5
Using the included screws, attach UPS mounting
brackets to the middle mounting holes on the UPS. The
mounting bracket "ears" should face inward.
Note: It is recommended you remove the UPS internal
batteries prior to installation. Doing so will remove excess
weight and allow for safer handling. Refer to your UPS Owner's
Manual for battery removal instructions.
Remove the internal batteries from the UPS before proceeding with this step. For battery removal
instructions, refer to your UPS Owner's Manual.
Note: If installing a WEBCARDLXMINI (sold separately), install the card prior to UPS installation.
6
With the aid of an assistant, lift your UPS with its rear panel facing toward the PDM and slide it atop the 2-Post Brackets.
Push the UPS toward the PDM so its blindmate connectors securely mate with the connectors on the PDM unit
green pin will appear on the PDM's front panel to indicate a proper connection
front mounting rails with user-supplied screws and washers
Note: If internal batteries were removed, refer to your UPS Owner's Manual for battery installation instructions.
B
6
7
If an external battery pack is being added to the installation, refer to the instructions in your external battery pack Owner's
Manual.
A
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
5
B
. Attach the UPS mounting ears to the
C
. Tighten all screws securely.
3
T
O N
F R
S
U P
O F
A
. A
C
19-11-207-93-39A3_RevA
Publicidad
