Publicidad
Idiomas disponibles
Idiomas disponibles
• Ensure that power is switched off before starting the assem-
bly.
• Please observe all the safety rules given below.
• Disconnect from the mains: Ensure that the output power circuit
is free of voltage
• Secure against switching on again: Ensure that no one acciden-
tally switches on the power again. Mask the fuse so as to prevent
an accidental switching-on again!
• Ensure that there is no voltage: Using a measuring device or a
voltage tester (phase tester), verify that the circuit has no power.
4. Installation
Take the device out of the package and remove all the packaging material. Deac-
tivate the fuse of the power circuit at the place where you want to connect the
spotlight.
1.
Make a hole with the required diameter for the recessed spotlight at the
desired location.
2.
Connect the recessed spotlight to the mains.
3.
Press the clips of the spotlight upwards and insert it into the drilled hole.
8
English
Publicidad
