Presetting For Mounting The Isofix Child Restraint System - Fiat ISOFIX Manual De Instrucciones

PRESETTING FOR
MOUNTING THE
ISOFIX CHILD
RESTRAINT SYSTEM
This car is preset for mounting the
Universal Isofix child restraint system,
a new European standardised system
for carrying children safely.
It is possible to mount at the same
time both the traditional restraint sys-
tem and the Isofix one.
Fig. 1 shows a child's seat by way of
example. The Universal Isofix child's
seat covers weight group: 1.
Other weight groups are covered by a
specific Isofix child seat that can be
used only if specifically designed, test-
ed and approved for his vehicle (see
the list of vehicles accompanying the
child seat).
fig. 1
Due to its different anchoring system,
the Universal Isofix child's seat shall be
anchored to the proper lower metal rings
A-fig. 2, set between rear seat back
and cushion. The upper belt (provided
with the child's seat) shall be then se-
cured to ring B-fig. 3 set at the back
of the seat backrest at child's seat
height.
fig. 2
Remember that in case of Universal
Isofix child's seat, you can only use all
those seats approved with the marking
ECE R44/03 Isofix.
F0H0614m
F0H0140m
9