General Precautions - Texi Zorro 100 Manual De Usuario

EN TEXI Zorro 100 operation manual
IMPORTANT!
This instruction manual contains important instructions on how to use the device correctly,
safely and economically. Compliance with its recommendations will avoid hazards, reduce
downtime, increase reliability and durability of the device. The operating instructions must
always be available at the workplace. The device may only be operated by an employee tra-
ined in health and safety after reading this manual.
The Supplier shall not be liable for damages resulting from improper or unintended use.

GENERAL PRECAUTIONS

To minimize the risk of fire, electric shock or injury, observe the following precautions:
- Keep the workplace clean.
- Pay attention to the working environment of the knife; do not subject it to atmospheric condi
tions.
- Do not work in dusty rooms where aerosols are being sprayed or where oxygen is being
supplied.
- Ensure that the workplace is well lit.
- Beware of the danger of electric shock.
- Always turn off the knife before changing the blade or grinding stone.
- Pay attention to clothing. Damaged hair or loose clothing can be caught by the moving parts
of the knife.
- Be careful not to switch on the knife accidentally.
- For even the slightest damage, always check if the damaged part needs to be replaced.
- Never install on knife attachments and accessories other than those recommended by the
manufacturer and supplier.
- Do not modify the knife independently.
- Do not leave the knife near unattended persons or children.
- After finishing work, turn off the knife .
- The protective cover must be at the correct height during operation. After finishing work, the
protective cover must be in the lowest position (covering the blade over the entire surface).
Before starting work
Using the knife without safety elements (covers) is forbidden for the operator as dangerous.
When working on the work table, there should only be elements that are necessary for opera-
tion.
Do not touch any of the machine's mobile elements during operation.
Turn off the knife before changing the blade and other operations that require mechanical
intervention.
If you notice any irregularities in the operation of the knife, immediately turn it off and notify
the mechanic or supervisor. After finishing work, turn off the knife and remove the battery.
This product is not a toy!
We hope that you will use this knife with pleasure for a long time.
13