EDM Product 50137 Instrucciones De Uso página 12

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
50137
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
GENERAL INFORMATION
Make sure to use the studs in your wall before mounting the wall plate. Do not mount this
product into the drywall. Do not mount this product on drywall, unless it is ensured that it is
capable of supporting the weight.
- Distance min / max. the wall: 2,6cm
WARNING
1. The wall or mounting surface must be capable of supporting the combined weight of the
mount and the display; if not, the structure must be reinforced.
2. Locate pipes, wires, or any other hazards in the wall where you with to install the mount
before drilling.
3. Safety gear and proper tools must be used. Failure to do so can result in injury or damage.
4. Two people are recommended for installation. do not attempt to lift a heavy display without
assistance.
5. Follow all instructions and recommendations regarding adequate ventilation and suitable
locations for mounting your display.
INSTALLATION
1. Take a long horizontal bracket.
2. Drill four hole into the wall taking care to measure the distances to fit the wall mount body.
Insert the four plastic anchors (a) into the holes and then affix the wall mount body to the wall
by inserting the four 2 inch heavy duty screws (B) through the slots and into the anchors.
Make sure the slotted openings are hanging down and the ledge is facing towards you. Use
a drill to secure.
3. Take the long vertical brackets and install them onto the back of the flat screen TV. Insert
mounting screws (C or D) and washers (E) into the holes on the brackets and fit them to the
holes on the back on the TV. Use a screwdriver to carefully secure.
4. Take the two long vertical brackets with the TV mounted and fit the grooves onto the
ledges of the long horizontal brackets (F). Use the attached bolts to tighten the vertical
brackets.