Bosch EasyHammer 12V Manual Original página 14

14 | English
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Hexagonal/SDS quick tool holder
(2) Dust protection cap
(3) Locking sleeve
(4) Mode selector switch
(5) On/off switch
(6) Handle (insulated gripping surface)
(7) Battery charge indicator
a)
(8) USB Type-C® port
(9) Flap for USB Type-C® port
(10) Worklight
(11) USB cable
(12) Drill bit with SDS quick shank
(13) Drill bit with hexagonal shank with groove
(14) Screwdriver bit with hexagonal shank with
b)
groove
(15) Universal bit holder with hexagonal shank with
b)
groove
(16) Screwdriver bit with hexagonal shank
b)
(17) Power supply (country-specific)
a) USB Type-C® and USB-C® are trademarks of USB Implementers
Forum.
b) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated speed
Max. torque
– Soft screwdriving ap-
plication
– Hard screwdriving ap-
plication
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Impact rate
Tool holder
Max. drilling diameter
– Concrete and masonry
– Metal
– Wood
Max. screw diameter
1 609 92A 4MK | (28.01.2021)
Cordless rotary hammer
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temper-
ature
– During charging
– During operation
Recommended power supply
– 27 W USB-C
A) Limited performance at temperatures <0 °C
Additional technical data can be found at:
a)
http://www.bosch-do-it.com/ecodesign
Noise/Vibration Information
Noise emission values determined according to
b)
EN 60745-2-6.
b)
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
b) determined according to EN 60745-2-6:
Hammer drilling into concrete: a
Drilling into metal: a
Screwdriving: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
EasyHammer 12V
The stated vibration level and noise emission value repres-
3 603 JD0 0.. ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
V= 12
plication tools or is poorly maintained, the vibration level
-1
min 0−850
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
Nm 5.5
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
Nm 17
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
J 0.5
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
-1
min 4300
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
1/4" hexagonal
SDS quick
Assembly
mm 10
Battery Charging (see figure A)
mm 6
u
mm 10
mm 6
A)
and
during storage
(triax vector sum) and uncertainty K
h
= 23 m/s
h
2
= 2,5 m/s , K = 1,5 m/s
h
2
< 2,5 m/s , K = 1,5 m/s
h
Use only the power adaptors listed in the technical
data. Only these power adaptors are matched to the lith-
ium-ion battery of your power tool.
EasyHammer 12V
kg 1.1
°C +10 to +35
°C –10 to +50
1 600 A01 R..
2 2
, K = 3,0 m/s ,
2
,
2
,
Bosch Power Tools