General Safety Warnings; Electrical Safety - Elite IW440 Manual De Usuario

GENERAL SAFETY WARNINGS

WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Opera-
ting Instructions. The important precautions, safeguards and instructions appearing in this manual are not
meant to cover all possible situations. It must be understood that common sense and caution are factors which
cannot be built into the product.
EYE, EAR & LUNG PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA REQUIREMENTS or ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses ARE NOT a replacement for proper
eye protection.
WARNING: Non-compliant eyewear can cause serious injury if broken during operation of a power tool.
WARNING: Use hearing protection, particularly during extended periods of operation of the tool or if the opera-
tion is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRON-
MENT.
WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals that are known to cause cancer, birth defects. or other genetic abnormalities. These
chemicals include:
Lead from lead-based paints.
Crystalline silica from bricks, cement, and other masonry products.
Arsenic and chromium from chemically-treated lumber.
The level of risk from exposure to these chemicals varies according to how often this type of work is performed.
In order to reduce exposure to these chemicals, work in a well-ventilated area, and use approved safety equip-
ment, such as a dust mask that is speci cally designed to lter out microscopic particles.

ELECTRICAL SAFETY

WARNING: To avoid electrical hazards, re hazards or damage to the tool, use proper circuit protection.
This tool is wired at the factory for 120 V operation. It must be connected to a 120 V 15 A time delayed fuse or
circuit breaker. To avoid shock or re, replace power cord immediately if it is worn, cut or damaged in any way.
1
www.ELITETOOLS.co
Keep Working