Saivod MSGE-2819S Manual Del Usuario página 43

NOTE: Under the states of auto menu and weight defrost, cooking time cannot be increased by pressing
" INICIAR/+30S/CONFIRMAR "
6. Defrost By Weight
Peso
1)
Press "
Tiempo descongelación
2)
Turn " " to select the food weight. The range of weight is 100-2000g.
3)
Press " INICIAR/+30S/CONFIRMAR " key to start defrosting.
7. Defrost By Time
Peso
1)
Press "
Tiempo descongelación
2)
Turn " " to select the cooking time.
3)
Press " INICIAR/+30S/CONFIRMAR " key to start defrosting.
8. Multi-Stage Cooking
Two stages can be maximumly set. If one stages is defrosting, it should be put in the first
stage. The buzzer will ring once after each stage and the next stage will begin.
NOTE: Auto menu cannot be set as one of the multi-stage.
EXAMPLE: if you want to defrost the food for 5 minutes, then to cook with 80% microwave power for 7
minutes. The steps are as following:
Peso
Peso
1)
Press "
Tiempo descongelación
2)
Turn " " to adjust the defrost time of 5 minutes;
3)
Press"MICROONDAS/GRILL/COMBI" once;
4)
Turn " " to choose 80% microwave power till "P80" display;
5)
Press "INICIAR/+30S/CONFIRMAR" to confirm;
6)
Turn " " to adjust the cooking time of 7 minutes;
7)
Press " INICIAR/+30S/CONFIRMAR " to start cooking.
9. Pre-set function
1)
Set the clock first. (Consult the instruction of clock setting.)
2)
Input the cooking program. Two stages can be set at most. Defrosting should not
preset function.
EXAMPLE: if you want to cook with 80% microwave power for 7 minutes.
a.
Press" MICROONDAS/GRILL/COMBI "once;
b.
Turn " " to choose 80% microwave power till "P80"
c.
Press " INICIAR/+30S/CONFIRMAR " to confirm;
d.
Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " as following: " INICIAR/+30S/CONFIRMAR "Then do
3)
Press " RELOJ/PRE SET ". The hour figures flash;
4)
Turn " " to adjust the hour figures, the input time should be within 0--23.
" once, the screen will display "dEF1".
" twice, the screen will display "dEF2".
" twice, the screen will display "dEF2";
display;
GB
be set in
43