Dutchblue 5026-B Instrucciones De Uso página 10

RECLINE
• Press the Recline button and the chair will recline.
• Once you have reached the desired position release the button and the chair will stop
reclining.
RECLINE TO SIT
• Press the Sit button to return the chair from reclined position to sitting position.
Important: Do not put your hands in between the seat and the footrest or in between the
metals parts when the chair is reclining or when the chair is returning back from reclined
position as it may cause injuries to the fingers or the hands.
LIFT
• Press the Sit button to lift the chair from sitting position. Once you have reached the desired
lifted position release the button and the chair will stop lifting.
LIFT TO SIT
• Press the Recline button to return the chair from lifted position to sitting position.
TO SIT AND STAND
• Release and hold the up/down switch in the "↑" position to raise the lift chair to standing
position. Back into the lift chair and sit in the center of the seat. Use the armrests of the lift
chair for support if necessary.
• Release and hold the up/down switch in the "↓" position until comfortable.
• To return to standing position, push and hold the up/down switch in the "↑" position. The lift
chair will begin to rise. Release the switch when the lift chair reaches a height where you can
stand up comfortably.
TO SIT AND RECLINE
• Release and hold the up/down switch in the "↓" position to reclining position until comfortable.
• Release and hold the up/down switch in the "↑" position to return the lift chair to the sitting
position.
• To return to standing position, push and hold the up/down switch in the "↑" position. The lift
chair will begin to rise. Release the switch when the lift chair reaches a height where you can
stand up comfortably.
THERMAL SHUTOFF
• The lift chair is equipped with an internal thermal shut off switch located inside the external
transformer to prevent the motor control box from overheating. If the motor stops during the
lifting movement, allow the lift chair to remain in this stationary position for 10 minutes. This
will allow the motor control box to cool down and reset itself. After cooling down, the normal
use of the lift chair can be resumed.
10
ENGLISH
USAGE
dutchblue.com