Start Up - Kärcher HKS 100 Manual Del Usuario

Flow volume [l/h]
3000
3000
3400
3800
4500
The following nozzles are available upon request:
Flow volume [l/h]
For further special configurations please
contact Kärcher.

Start up

1 Counterweight
2 Protective cover
3 Frame
 Screw the counterweight onto the inte-
rior cleaner.
 Screw cleaning head to the hose or the
frame (frames: see accessories).
Regulator screw
Note: The interior cleaner was filled with
regulator fluid, adjusted and sealed ex fac-
tory. Do not turn the regulator screw, as
proper operation will no longer be guaran-
teed and a readjustment by the customer
service will be necessary.
A Regulator screw
Cover with frame
Adjusting the height of the cover:
 Release fastening toggle.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
24
Pressure [MPa] Number of noz-
zles
7,5
5,0
9,5
8,0
8,5
Pressure [MPa] Number of noz-
zles
The nozzle size is marked on the key sur-
face of the nozzle.
Adjusting the height of the cover:
 Loosen the fastening toggle for height
adjustment.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Tilt the interior cleaner:
 Loosen the fastening toggle for tilting.
 Set the inclination (±15°) of the interior
cleaner.
 Tighten the fastening toggle.
Selecting the nozzle
Nozzle size [mm] Order No.
2 2,5
2 2,7
2 2,5
2 2,7
2 2,9
Nozzle size [mm] Order No.
2 1,65
4 1,65
4 1,8
2 2,4
2 3,5
2 3,8
Swivel frame
10
-
EN
Remark
5.765-018.0
4.765-006.0 Standard
5.765-018.0
4.765-006.0 Standard
5.765-025.0
Remark
5.765-082.0
5.765-082.0
4.765-007.0
5.765-007.0 Brass, for solvents only
5.768-075.0
4.765-008.0