EN
User manual
1
Introduction
Thank you for purchasing the single tub washing machine.
6 Please read this instructions manual carefully in order to
operate the machine properly.
Keep this manual handy for future reference.
2 Symbol clarification
See image 1
1. WEEE with bar.
2. CE logo.
3 Parts list
1
Inlet hose
3
Owner's manual
4 Operation Guide
4.1
Washing
1. Place the tub on a level surface near a drainage point.
2. Open the top cover and turn the spin basket clockwise to
release and remove.
3. Clip the water drainage tube to the right side.
4. Place the laundry in the washing machine.
5. Plug the washing machine in.
6. Fill the tub with warm water (not exceeding 40 degrees
Celsius/woolen fabrics 30 degrees Celsius) to level mark via
the water inlet or directly by using a jug or pail.
7. Add washing powder to the water.
8. Turn the wash timer to the desired duration.
9. When timer stops, release the water through the drainage
tube.
4.2
Rinsing
1. Clip the drainage tube to the side of the machine.
2. Refill the tub with clean water up to the same level.
3. Turn the dial to the desired time.
4. When the cycle has finished, unclip the drainage tube and
release the water.
5. Repeat the above process if necessary.
6. Leave the drainage tube in released position.
4.3
Spin
1. Place wet clothes into the spin bucket. Split the load if
necessary (do not overload the basket, maximum 2 kg).
2. Place the plate over the clothes and press down to secure.
40 | 50548
2
Spin basket
3. Place the spin bucket into the tub, turn counterclockwise
and click into position.
4. Turn the dial to your desired spin time.
5 Additional information
Wiring diagram
See image 2
1
Brown
2
Yellow
3
Purple
4
Blue
6 Caution: Before checking for trouble or repairing, unplug
and touch both the plug pin and earth wire to prevent the
breakdown caused by static electricity.
6 Maintenance and cleaning
•
When cleaning the housing of the machine, wipe it
thoroughly with a soft cloth. If the unit is very dirty, please
use a neutral liquid soap to clean.
•
Store in a cool, dry place.
Troubleshooting
Trouble
Possible causes
Power failure?
Fuse Blown?
Does not wash.
Is the power cord connected to the
socket properly?
Switch the timer?
Is the drain hose kept down?
Is the drain hose twisted or the
Does not drain.
threshold too high?
Is the drain hose frozen?
Is the load too heavy?
Washing is forceless.
Is the V belt too loose?
Is the voltage too low?
7 Technical specifications
•
220-240~, 50/60 Hz, Class I, IPX4
•
Washing: 240 W
•
Washing Capacity: 2.6 Kg
5
Washing time
6
Red
7
Yellow/green
8
Electric motor