Cleaning And Maintenance - Klarstein Iceberg Pure Manual De Instrucciones

EN
30

CLEANING AND MAINTENANCE

Notes on cleaning and maintenance
WARNING
Risk of electric shock! Do not touch the mains plug with wet or damp
hands.
• Switch off the appliance and remove the mains plug from the socket.
• Always pull the mains plug by the plug and not by the cable from the socket.
Cleaning the water tank
Note: Switch off the appliance and unplug the mains plug from the socket before
cleaning the water tank.
3. First take out the water tank and open the rotary latch of the pressurised water
pump unit.
4. Take out the pump components and then remove the entire water tank.
5. Wipe the water tank with a damp cloth. For heavier soiling you can use a soft
brush, brush a few times.
6. After cleaning the water tank, replace it in the reverse order.
When the rotary latch is
closed, the components
of the water pump are
secured.
If you open the rotary
latch by turning it, the
components of the water
pump are released and
can be removed.
The water tank can be
removed separately.