Need Help - Cudy LT500 Guía De Instalación Rápida

4. Then please check 4G information card of the status page. If the status
is connected, means connected to the internet successfully.
4G
Status Connected
RSSI 22
Upload / Download 770.63KB / 681.69KB
More Details
Connected
5. If 4G is not connected, or if you want to customize the router yourself,
click "Quick Setup" and follow the step-by-step instructions to config-
ure the router.
Status
Internet
Work Mode
Model
Quick Setup
Note：
1, If you are not sure about APN parameters, please contact your internet provider.
2, If you meet any other problems, don't hesitate to contact our technical support
team: support@cudy.com
Enjoy the internet!
4G
Status Not connected
RSSI -
Upload / Download 0.00 B / 0.00 B
More Details
Not connected
Not connected
4G Router
LT500
— 3 —
LED and Button
Name Status
Red
Solid On Blue
Purple
System
Red
LED
Flashing Blue
Red-Purple-Blue
Power adapter is not connected to the device.
Off
On The corresponding ethernet port is connected.
Ethernet
LED
The corresponding ethernet port is not connected.
Off
WPS Press and hold 1 second to enable the WPS function.
Button
Press and hold this button for about 6 seconds to
Reset
reset the router to its factory default settings.

Need Help?

Q1. What should I do if I cannot access the web management page?
A1: If the computer is set to a static IP address, change its settings to obtain an IP
address automatically.
A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the
web browser.
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and enable the active network adapter in use.
Q2. How do I restore the router to its factory default settings?
A1: With the router powered on, press and hold the RESET button for 6 seconds
before release. Wait the router resets.
A2: Log in to the web management page of the router, and go to
Advanced Settings >Reset , click Perform Reset and wait until the reset process is
complete.
Indication
Internet is not connected
4G or WAN Internet is connected
2/3G is Connected
System is starting up
WPS is in progress
Software Upgrading
— 4 —
EN