RS Pro RS HS-608 Manual De Instrucciones página 26

Oscilloscope Section/English
Appendix 1: Daily maintenance
When storing the device, please don't expose LCD display surface to direct sunlight.
Note: Do not store in high humidity condition.
Cleaning:
Please clean outside surface of the device by following steps:
1. Wipe dust of external part of the device and probe with soft cloth. While cleaning the LCD
screen, pay attention not to scratch the transparent plastic protection screen.
2. Clean the device with a water soaked cloth, note to disconnect the power. If a more thorough
clean is needed, 75% isopropanol water mix can be used.
Note:
•To avoid device or probe damage, any abradant reagent or chemical cleaning reagent can
not be adopted.
•Before cleaning the device, please make sure to disconnect all lines.
48 13/08/2017 Version No. 001
Appendix 2:Specifications
Main specification
Function
3.5" color TFT-LCD; 320 X 240 pixels
LCD display
15~50 V/S
Refresh rate
10MHz
Bandwidth
Coupling, AC, DC
Input
Input impedance 1000C/CA:1MΩ +/-2% // 15pF
+/-2pF
Max input voltage 1000V/600V (DC+AC peak value,
1MΩ input impedance)
Probe attenuation 1X
Sampling mode Real time sampling, random sampling
Real time sample rate 50MSa/s~ 500pts
Sampling resolution 8 bits
Record length 3K / 10pages
Storage length 10 charts
Time error ±5 s / 24hours
FFT collect 4-256 points
Bluetooth 9600 baud rate
transmission rage
Li-ion battery 7.4V 2400mAH
13/08/2017 Version No. 001
Oscilloscope Section/English
Format or note
Fast / Slow
0 - 10 MHz
AC，DC
CAT I, CAT II , CAT III
Single channel 3K,
SRAM
EEPROM
49