RS Pro RS HS-608 Manual De Instrucciones página 9

MeterScope/English
5-11.Capacitance Measurements
WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug
the line cords.
1.Set the rotary function switch to the green
Ω CAP
position.
2.Press the soft key labeled Menu. Move the
menu selector to the menu item labeled
Cap. Press the soft key Cap.
3.Insert the black test lead banana plug into
the negative COM jack. Insert the red test
lead banana plug into the positive V jack.
4.Read the capacitance value in the Display
14 13/08/2017 Version No. 001
5-12.DC Current Measurements
CAUTION: Do not make 20A current measurements for longer than 30 seconds. Exceeding
30 seconds may cause damage to the meter and/or the test leads.
1.Insert the black test lead banana plug into
the negative COM jack.
2.For current measurements up to 5000µA DC,
set the function switch to the yellow µA
position and insert the red test lead banana
plug into the µA/mA jack.
3.For current measurements up to500mA DC,
set the function switch to the yellow mA
position and insert the red test lead banana
plug into the µA/mA jack.
4.For current measurements up to 10A DC,
set the function switch to the yellow 10A
position and insert the red test lead banana
plug into the 10A jack.
5.Press the MODE button to indicate "DC"
on the display.
6.Read the current in the display.
13/08/2017 Version No. 001
MeterScope/English
15