Learning Function - Jasco RM24940 Manual De Instrucciones

Learning Function

The learning feature is used as a supplement to the stan­
dard preprogrammed library. the standar code library
provides most of the functions needed,, but you can add
additional functions from your original remote. Note:
No functions may be stored under the LEARN, SLEEP,
CODESEARCH, MENU or any of the device buttons.
1. Place the remote control unit and the Original remote
control unit so that they
face each other. They
should not be any more
than 2 inches apart.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE SEARCH
button.
3. Press and release the desired
Mode button (TV, VCR,
CABLE, SAT, etc. . . .) The
INDICATOR LIGHT will blink
off once button press is accept­
ed.
4. Press and release the LEARN
button.
5. Press and release the valid
button to be learned on the
94940 remote in which you will
store a new function. The L1, L2,
L3 or any other button (except,
LEARN, CODE SEARCH, MENU,
OR device buttons) can be used to
store learned functions.
6. Press and hold the button on the
original remote control until INDI­
CATOR LIGHT on the 94940
remote blinks once. Once the
INDICATOR LIGHT blinks you
may continue with the next func­
tion.
If there is error in learning the
new function the INDICATOR
LIGHT will flash for 3 seconds but
remain in the learning mode.
Return to step 5 if the INDICA-
TOR LIGHT flashed.
NOTE: Hold the function key on
your original remote for at least 3
seconds for the command to be successfully learned.
7. Repeat steps 5 and 6 to store more functions.
8. Once the selected functions are stored press the CODE
SEARCH button and the remote will return to original
operation mode.
2 inches
CODE
SEARCH
VCR
CD
CBL
SAT
L1
or other button
4
INDICATOR
LIGHT
TV
(BLINK)
CBL/SAT
AUDIO•AUX
DVD
LEARN
L2 L3
BLINK
CODE
SEARCH