Emergency Procedure - Gude GIS 200 Traducción Del Manual De Instrucciones Original

ENGLISH
28
Caution - hot surface!
Protect against humidity Never expose
tool to rain.
Prohibition for persons with a pacemaker!
Keep distance of persons Observe to keep
out of dangerous zone
~
Single-phase transformer with rectifier
1
MIG (welding, metal-inert-gas)
MAG (welding, metal-active-gas)
WIG (tungsten inert gas welding)
MMA (electrode welding)
Suitable for welding with an increased
electric risk.
Single-phase alternating current with
rated frequency of 50 Hz
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Risk of explosion
Warning against toxic
fumes!Not to be used in enc-
losed spaces
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site 2. Accident type
3. Number of injured persons4. Injury type(s)
Maintenance
Before carrying out any work on the machine,
disconnect the plug from the socket.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
The machine must not be used under any circum-
stances if the machine or the safety devices are
damaged.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
All moving metal parts, e.g. wheels and the side cover,
to be regularly lubricated with oil.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.