Glacier bay 67569W-6001 Guía De Uso Y Mantenimiento página 6

Installation (continued)
6
Installing the horizontal rod,
stopper, and strap
□
Install the horizontal rod (L) and stopper (F), as
shown (1) and (2). Make sure the horizontal
rod (L) insert into the pop-up body (J)
completely, as shown (3).
□
Close the easy install rotating clip (K).
1
F
J
3
2
L
Close
K
7
Adjusting the length of
horizontal rod
NOTE: If the horizontal rod of the pop-up assembly is too
long, do not cut, it can be adjusted.
□
If the horizontal rod (L) is too long, as shown in
Fig 1, the length can be adjusted.
□
Remove the clip (P) from the horizontal rod (L).
Slide the plastic portion of the rod to adjust to the
desired length. The excess length (1) can be
removed by snapping off with pliers at the
perforated segment, or cut off with a saw.
□
After the plastic portion is positioned properly,
reinstall the clip (P) as shown in Fig 3
L
L
M
L
6
Wall
Fig 1
1
P
Fig 2
P
Fig 3