Introduction; About This User Guide; About The Producer; Unpacking And Setup Instructions - Rimage Producer P-IV 8200N Guia Del Usuario

Introduction

This manual provides the information needed to configure, operate, and
maintain the Rimage Producer 8200N, 7200N, 6200N, and 6200. The terms
'system' and 'autoloader' may be used throughout this manual to refer to
the Producer products. The term printer refers to either the Everest 600 or
Prism III printer.
For information specific to the Producer refer to the Rimage Producer IV
User Guide found at www.rimage.com/support. From the Support page
select: Producer Series > Product Name > User Manuals tab.
Important! Your Producer system may not look exactly like the model
featured in this user guide.

About this User Guide

• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our web
site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 7 paths. Other Windows operating system navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Note: A Note provides supplemental information or information that
may apply only in special cases. For example, memory limitations,
equipment configurations, or details that apply to specific versions of a
program would be included in a Note.
Tip: A Tip suggests alternative methods that may not be obvious and
helps you understand the benefits and capabilities of the product.
Important!
An Important note provides information essential to the completion
•
of a task.
Important supplemental information.
•
You can disregard information in a Tip and still complete a task, but
•
do not disregard an Important note.
2002543_A
n
n

About the Producer

The Producer IV is available with either the Everest 600 printer or the
Prism III printer. For information about your printer, refer to the setup and
installation guide or user guide that shipped with your printer.
The Producer 6200N, 7200N, and 8200N autoloaders have an embedded
control center (PC). The embedded PC is a network-ready device that
receives orders from other networked computers. You can also operate
the Producer 6200N, 7200N, and 8200N locally by attaching a monitor,
keyboard, and mouse.
The Producer 6200 requires an external PC to be used as the external
control center. In most instances, the Producer 6200 autoloader is not
shipped with an external PC. You must provide a PC to be used as the
external control center. Refer to the Producer specifications for minimum
and optimum PC requirements for the 6200. Technical Specifications for this
product can be found at www.rimage.com/support. From the Support page
select: Producer Series > Produce Name > User Manuals tab.
For information about setting up and submitting orders from a networked
PC, refer to the
www.rimage.com/support.

Unpacking and Setup Instructions

To unpack your Producer IV, refer to the unpacking label on the autoloader
box. For setup instructions, refer to the Setup and Installation Guide that
shipped with your product.
For more information visit rimage.com/support
Caution: A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
Warning! A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining the
equipment.
Rimage Advanced Setup (Networking) Guide available at
1