Nilox UPS SERVER PRO Manual Para El Usuario página 7

Rack mount configuration setup
These UPS can be installed into standard 19" rack. It requires the height of 2U from the rack. Use
the following procedure to install the UPS into a rack.
Server Pro 1100 (Rack kit included)
1- Align the mounting bearings with screw holes on the side of the UPS. (Mind the orientation of
plates)
2- Align the mounting ears with screw holes on the side of the UPS and screw together.(Mind the
Left and Right plates)
3- Fix the slide to the rack enclosure with screws, then Insert UPS into the slide assemblies and
lock it well in the rack enclosure
Server Pro 2200/3300 (Rack kit optional)
1- Align the mounting ears with screw holes on the side of the UPS, and tighten the screw.
2- Assemble the rack rails with the rack-mounting.
3- Slide in the UPS into the rack rail and lock it in the rack enclosure. Tighten the screw, and
the load can then be connected.